. Huez, expliquant ainsi la différence d'impact de la présence d'hydrures sur la ductilité du T40

, 2 et de Rm avec la concentration en hydrogène pourrait également être attribué à la présence d'hydrures. En effet, Xu et al. ont mesuré une valeur de Rp0,2 d'un hydrure de titane de l'ordre de 895 MPa. Cette valeur est bien plus importante que la valeur de Rp0, L'augmentation progressive de Rp0

. Le-durcissement-lié-À-la-présence-d, hydrures pourrait donc s'apparenter à un phénomène de durcissement par effet composite. C'est ce qui a été mis en évidence par Arsène et al. [180] et par Le Saux et al. [181] sur des alliages de zirconium. Arsène et al. ont en effet mesuré une augmentation de la résistance mécanique d'un Zircaloy liée à la présence d'hydrures de l'ordre de 0,06 MPa

, Les échantillons de TA6V, pp.10-12

, Celles-ci peuvent être attribuées aux hydrures fragiles présents au niveau de ces interfaces, vol.182

, Les observations MEB n'ont pas permis d'identifier exactement ou s'amorcent les ruptures fragiles

, L'importante ductilité des éprouvettes des trois matériaux chargées en hydrogène et testées à 300 °C s'explique par l'absence d'hydrure à cette température

. Cependant, En effet, à cette température, la limite d'élasticité des hydrures pourrait être suffisamment basse pour leur permettre de se déformer plastiquement avec la matrice métallique. Plusieurs études sur les alliages de zirconium permettent d'appuyer cette hypothèse. Arsene et al. ont montré que la transition ductile fragile du Zircaloy-2 recristallisé se produit pour des concentrations en hydrogène de 1000 ppm mas, une concentration plus élevée en hydrogène telle que des hydrures soient présents à 300 °C n'aurait pas nécessairement engendré de fragilité des matériaux à cette température

Y. De-la-même-façon, ont montré que le Zircaloy-4 contenant 200 ppm mas. d'hydrogène présente une perte de ductilité importante à 20 °C lorsque la quantité d'hydrures radiaux est augmentée mais aucune baisse de ductilité n'a été mesurée à 300 °C [183] alors qu'à cette température la limite de solubilité n'est que de 70 ppm mas. environ. Enfin, Choubey et al. ont observé que le nombre d'amorces de fissure d'un alliage Zr-2,5Nb biphasé contenant 100 ppm mas

, Effet de l'hydrogène et de l'oxygène en solution solide sur les propriétés mécaniques

P. Dans-cette, seul l'effet de l'hydrogène incorporé dans les matériaux grâce à la procédure de chargement en hydrogène sera discuté

, Cela se traduit pas la diminution de Rp0,2 avec la concentration en hydrogène (Figure 130), Le chargement en hydrogène induit un adoucissement au début du domaine de déformation plastique du TA6V et du Ti10-2-3 testés à 20 °C (Figure 142)

, Il peut être attribué à la

, La corrosion et l'altération des matériaux du nucléaire. Le Moniteur, 2010.

V. Duquesnes and . De, hydruration du titane et ses alliages : impact des paramètres de mise en forme du matériau et conséquences sur sa durabilité en milieu corrosif, 2016.

C. Bisor-melloul, Understanding of hydrogen uptake mechanisms in zirconium alloys in PWR corrosion conditions-impact of hydrides on Zircaloy-4 corrosion, 2010.

J. Thomazet, A. Dalmais, P. Bossis, J. Godlewski, M. Blat et al., AIEA Technical Comittee Meeting on behavior of high corrosion Zr-based alloys, 2005.

G. Lütjering and J. C. Williams, Titanium, vol.2, 2003.

W. G. Burgers, « On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, vol.1, issue.7, pp.561-586, 1934.

J. B. Newkirk and A. H. Geisler, « Crystallographic aspects of the beta to alpha transformation in titanium, Acta Metall, vol.1, issue.3, pp.370-374, 1953.

Y. Combres, Traitements thermiques des alliages de titane », 2013.

M. K. Mcquillan, Phase transformations in titanium and its alloys, vol.8, pp.41-104, 1963.

M. Surand, Étude du comportement viscoplastique en traction et en fluage de l'alliage TA6V de 20 à 600 degrés Celsius, 2013.

A. Settefrati, « Étude expérimentale et modélisation par champ de phase de la formation de [alpha] dans les alliages de titane, 2012.

C. Leyens, M. Peters, and É. , Titanium and titanium alloys: fundamentals and applications

J. Wiley, , 2003.

G. Welsch, R. Boyer, E. W. Collings, and . Éd, Materials properties handbook: titanium alloys, Materials Park, 1994.

M. L. Wasz, F. R. Brotzen, R. B. Mclellan, and A. J. Griffin, Int. Mater. Rev, 2013.

I. Kornilov and V. Glazova, « Formation of Ti6O and Ti3O compounds in titanium-oxygen system, Dokl. Akad. Nauk Sssr, vol.150, issue.2, p.313, 1963.

B. Holmberg, Disorder and order in solid solutions of oxygen in alpha-titanium », Acta Endocrinol. (Copenh.), vol.40, p.1245, 1962.

J. L. Murray, H. A. Wriedt, O. The, and . Ti, Oxygen-Titanium) system », J. Phase Equilibria, vol.8, issue.2, pp.148-165, 1987.

P. Y. Simons and F. Dachille, The structure of TiO$\sb 2$II, a high-pressure phase of TiO$\sb 2$ », Acta Crystallogr, vol.23, issue.2, pp.334-336, 1967.

F. C. Gennari and D. M. Pasquevich, « Kinetics of the anatase-rutile transformation in TiO2 in the presence of Fe2O3, J. Mater. Sci, vol.33, issue.6, pp.1571-1578, 1998.

P. Sarrazin, F. Motte, J. Besson, and C. Coddet, « Mechanism of oxidation of titanium and alloy Ti6Al-4V by water-vapor, J. Common Met, vol.59, issue.2, pp.111-117, 1978.

R. D. Shannon, « Phase Transformation Studies in TiO2 Supporting Different Defect Mechanisms in Vacuum-Reduced and Hydrogen-Reduced Rutile, J. Appl. Phys, vol.35, issue.11, pp.3414-3416, 1964.

N. Khatun, Anatase to rutile phase transition promoted by vanadium substitution in TiO2 : A structural, vibrational and optoelectronic study, vol.43, pp.14128-14134, 2017.

G. C. Vásquez, « Influence of Fe and Al doping on the stabilization of the anatase phase in TiO2 nanoparticles, J. Mater. Chem. C, vol.2, pp.10377-10385, 2014.

F. L. Bregolin, M. Behar, and E. F. Dyment, « Diffusion study of 18O implanted into ?-Ti using the nuclear resonance technique, Appl. Phys. A, vol.86, issue.4, pp.481-484, 2007.

J. W. Rogers, K. L. Erickson, D. N. Belton, R. W. Springer, T. N. Taylor et al., « Low temperature diffusion of oxygen in titanium and titanium oxide films, Appl. Surf. Sci, vol.35, issue.1, pp.137-152, 1988.

E. De-paula-e-silva, , 1972.

D. David, E. Garcia, and G. Beranger, « Measurement of diffusion-coefficient of oxygen in alpha titanium between 460-degrees and 750-degrees-c by use of the nuclear-reaction o-16(d,p)o-17x, Comptes Rendus Acad. Sci. Ser. Ii, vol.294, pp.945-948, 1982.

M. Göbel, V. A. Haanappel, and M. F. Stroosnijder, On the Determination of Diffusion Coefficients of Oxygen in One-Phase Ti (?-Ti) and Two-Phase Ti-4Nb (?-and ?-Ti) by MicroHardness Measurements, Oxid. Met, vol.55, issue.2, pp.137-151, 2001.

P. Kofstad, P. B. Anderson, and O. J. Krudtaa, « Oxidation of titanium in the temperature range 8001200°C », J. Common Met, vol.3, issue.2, pp.89-97, 1961.

R. P. Elliott, « Diffusion in Titanium and Titanium Alloys », DTIC Document, 1962.

C. J. Rosa, « Oxygen diffusion in alpha and beta titanium in the temperature range of 932° to 1142°C, Metall. Trans, vol.1, issue.9, pp.2517-2522, 1970.

G. W. Wille and J. W. Davis, Hydrogen in titanium alloys, 1981.

R. Khodabakhsh and D. Ross, « Determination of the hydrogen site occupation in the alpha-phase of zirconium hydride and in the alpha-phase and beta-phase of titanium hydride by inelastic neutronscattering », J. Phys. F-Met. Phys, vol.12, issue.1, pp.15-24, 1982.

R. Hempelmann, D. Richter, and E. A. Heidemann, « Hydrogen mobility in Ti1.2Mn1.8 hydride: A quasielastic neutron scattering study, J. Common Met, vol.88, issue.2, pp.343-351, 1982.

C. Korn and D. Zamir, « NMR study of hydrogen diffusion in the three different phases of the titaniumhydrogen system, J. Phys. Chem. Solids, vol.31, issue.3, pp.489-502, 1970.

X. Feaugas and E. Conforto, « Influence de l'hydrogène sur les mécanismes de déformation et d'endommagement des alliages de titane et de zirconium, pp.161-178, 2009.

F. H. Beck, Effect of hydrogen on the mechanical properties of titanium and its alloys, 1975.

N. Paton, B. Hickman, and E. D. Leslie, « Behavior of hydrogen in alpha-phase Ti-Al alloys, Metall. Trans, vol.2, issue.10, p.2791, 1971.

A. San-martin, F. D. Manchester, and H. The, hydrogen-titanium) system », Bull. Alloy Phase Diagr, vol.8, pp.30-42, 1987.

Y. Millet, Corrosion du titane et de ses alliages, 2016.

J. Huez, , 1996.

R. S. Vitt and K. Ono, Hydrogen solubility in alpha titanium, vol.2, pp.608-609, 1971.

S. Sidhu, L. Heaton, and E. D. Zauberis, « Neutron diffraction studies of hafnium-hydrogen and titaniumhydrogen systems, ACTA Crystallogr, vol.9, issue.6, pp.607-614, 1956.

E. Tal-gutelmacher and D. Eliezer, « Hydrogen-assisted degradation of titanium based alloys, Mater. Trans, vol.45, issue.5, pp.1594-1600, 2004.

R. I. Jaffee, The physical metallurgy of titanium alloys, vol.7, pp.65-163, 1958.

H. Christ, M. Decker, and E. S. Zeitler, « Hydrogen diffusion coefficients in the titanium alloys IMI 834, Ti 10-2-3, Ti 21 S, and alloy C », Metall. Mater. Trans. A, vol.31, issue.6, pp.1507-1517, 2000.

I. I. Phillips, P. Poole, and L. L. Shreir, « Hydride formation during cathodic polarization of Ti-II. Effect of temperature and pH of solution on hydride growth, Corros. Sci, vol.14, issue.9, pp.533-542, 1974.

T. P. Papazoglou and M. T. Et-hepwoth, « Diffusion of hydrogen in titanium, Trans. Metall. Soc. Aime, vol.242, p.682, 1968.

R. J. Wasilewski, G. L. Kehl, and M. , , vol.50, p.225, 1954.

E. H. Sevilla and R. M. Cotts, « Tracer diffusion coefficients of hydrogen at high concentration in b.c.c. host metal lattices, J. Common Met, vol.129, pp.223-228, 1987.

D. L. Johnson and H. G. Nelson, « Determination of hydrogen p?rmeation parameters in alpha titanium using the mass spectrometer, Metall. Trans, vol.4, issue.2, pp.569-573, 1973.

B. G. Pound, Hydrogen trapping in aged ?-titanium alloys, vol.45, pp.2059-2068, 1997.

Y. Hirohata, T. Nakamura, Y. Aihara, and E. T. Hino, « Dependence of surface oxidation on hydrogen absorption and desorption behaviors of Ti-6Al-4V alloy, J. Nucl. Mater, pp.831-836, 1999.

S. Yamanaka, T. Tanaka, S. Tsuboi, and M. Miyake, Effect of oxygen on solubility of hydrogen isotopes in titanium, vol.10, pp.303-308, 1989.

M. Hepworth and R. Schuhmann, Thermodynamic properties of titanium-oxygen-hydrogen alloys, vol.224, p.928, 1962.

T. H. Quach-kamimura, D. David, G. Beranger, A. Falanga, and G. Lozes, « The mutual interactions of oxygen and hydrogen in ?-titanium during heat treatment, J. Common Met, vol.125, pp.59-73, 1986.

G. Lenning, J. Spretnak, and E. R. Jaffee, Effect of hydrogen on alpha titanium alloys, vol.206, pp.1235-1240, 1956.

W. H. Erickson and D. Hardie, « The influence of alloying elements on the terminal solubility of hydrogen in ?-zirconium », J. Nucl. Mater, vol.13, issue.2, pp.254-262, 1964.

P. Kofstad, High-temperature oxidation of metals, 1966.

H. J. Ellingham, Reducibility of oxides and sulphides in metallurgical processes. », 1944.

P. Kofstad, K. Hauffe, and H. Kjollesdal, « Investigation on the oxidation mechanism of titanium, vol.12, pp.239-266, 1958.

N. Cabrera and N. F. Mott, Theory of the oxidation of metals, vol.12, p.163, 1949.

U. R. Evans, The oxidation of metals, vol.5, 1955.

C. Wagner, « Beitrag zur theorie des anlaufvorgangs », Z Phys Chem B, vol.21, pp.25-41, 1933.

I. Gurrappa, An oxidation model for predicting the life of titanium alloy components in gas turbine engines, J. Alloys Compd, vol.389, issue.2, pp.190-197, 2005.

H. L. Du, P. K. Datta, D. B. Lewis, and J. S. Burnell-gray, Air oxidation behaviour of Ti6Al4V alloy between 650 and 850 °C, vol.36, pp.631-642, 1994.

Y. Wouters, A. Galerie, and J. Petit, Thermal oxidation of titanium by water vapour, vol.104, pp.89-96, 1997.

A. V. Hippel, J. Kalnajs, and W. B. Westphal, « Protons, dipoles, and charge carriers in rutile in rutile, J. Phys. Chem. Solids, vol.23, issue.6, pp.779-799, 1962.

F. Motte, C. Coddet, P. Sarrazin, M. Azzopardi, and J. Besson, A comparative study of the oxidation with water vapor of pure titanium and of Ti-6Al-4V », vol.10, pp.113-126, 1976.

W. G. Cook and R. P. Olive, « Pourbaix diagrams for chromium, aluminum and titanium extended to high-subcritical and low-supercritical conditions », Corros. Sci, vol.58, pp.291-298, 2012.

B. Beverskog and I. Puigdomenech, « Revised pourbaix diagrams for iron at 25-300 °C », Corros. Sci, vol.38, pp.2121-2135, 1996.

K. G. Knauss, M. J. Dibley, W. L. Bourcier, H. F. Shaw, and . Ti, IV) hydrolysis constants derived from rutile solubility measurements made from 100 to 300 C », Appl. Geochem, vol.16, issue.9, pp.1115-1128, 2001.

J. Schmidt and W. Vogelsberger, « Dissolution Kinetics of Titanium Dioxide Nanoparticles: The Observation of an Unusual Kinetic Size Effect, J. Phys. Chem. B, vol.110, issue.9, pp.3955-3963, 2006.

P. Bénézeth, D. A. Palmer, and D. J. Wesolowski, « Aqueous high-temperature solubility studies. II. The solubility of boehmite at 0.03 m ionic strength as a function of temperature and pH as determined by in situ measurements, Geochim. Cosmochim. Acta, vol.65, issue.13, pp.2097-2111, 2001.

D. You and C. Rapport, , 2004.

P. R. Tremaine and J. C. Leblanc, « The solubility of magnetite and the hydrolysis and oxidation of Fe2+ in water to 300°C, J. Solut. Chem, vol.9, issue.6, pp.415-442, 1980.

L. Qiu, D. A. Guzonas, and D. G. Webb, « Zirconium dioxide solubility in high temperature aqueous solutions, J. Solut. Chem, vol.38, issue.7, pp.857-867, 2009.

N. S. Mcintyre, « X-Ray Photoelectron Studies of the Aqueous Oxidation of Inconel-600 Alloy, J. Electrochem. Soc, vol.126, issue.5, p.750, 1979.

F. Carrette, L. Guinard, and E. B. Pieraggi, « Kinetics of Corrosion Products Release from Nickelbase Alloys Corroding in Primary Water Conditions: a New Modelling of Release, International Conference on Water Chemistry in Reactors Systems, 2002.

A. Machet, Etude des premiers stades d'oxydation d'alliages inoxydables dans l'eau à haute température, 2004.

J. Kaneda, « General corrosion properties of titanium based alloys for the fuel claddings in the supercritical water-cooled reactor, Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power System-Water Reactors, The Minerals, Metals & Materials Society, pp.1409-1418, 2005.

J. Lu, Z. Mao, J. Zhang, C. Ma, X. Mao et al., Corrosion of titanium in supercritical water oxidation environments, vol.12, pp.1054-1057, 2002.

X. Tang, « Corrosion behavior of nickel base alloys, stainless steel and titanium alloy in supercritical water containing chloride, Chem. Eng. Res. Des, vol.100, pp.530-541, 2015.

S. Ankem and H. Margolin, « Modeling deformation in 2-phase alloys, J. Met, vol.38, issue.4, pp.25-29, 1986.

X. Feaugas and M. Clavel, « Cyclic deformation behaviour of an ?/? titanium alloy-i. micromechanisms of plasticity under various loading paths, Acta Mater, vol.45, issue.7, pp.2685-2701, 1997.

Y. Mahajan and H. Margolin, « Low cycle fatigue behavior of Ti-6AI-2Sn-4Zr-6Mo: Part II. Cyclic deformation behavior and low cycle fatigue, Metall. Trans. A, vol.13, issue.2, pp.269-274, 1982.

A. L. Helbert, X. Feaugas, and M. Clavel, « Effects of microstructural parameters and back stress on damage mechanisms in ?/? titanium alloys, Acta Mater, vol.46, issue.3, pp.939-951, 1998.

A. L. Helbert, X. Feaugas, and M. Clavel, The influence of internal stresses on the fracture toughness of ?/? titanium alloys, vol.30, p.2853, 1999.

. Rmi-titanium and . Co, Titanium Alloy Guide, 2000.

B. Barkia, « Viscoplasticité à l'ambiante du titane en relation avec ses teneurs en oxygène et hydrogène, 2014.

B. Legrand, « Relation between the electronic-structure and ease of gliding in hexagonal close-packed metals, Philos. Mag. B-Phys. Condens. MATTER Stat. Mech. Electron. Opt. Magn. Prop, vol.49, issue.2, pp.171-184, 1984.

R. Peierls, The size of a dislocation », Proc. Phys. Soc, vol.52, issue.1, p.34, 1940.

F. R. Nabarro, « Dislocations in a simple cubic lattice, Proc. Phys. Soc, vol.59, issue.2, p.256, 1947.

A. Churchman, « The slip modes of titanium and the effect of purity on their occurrence during tensile deformation of single crystals », Proc. R. Soc. Lond. Ser.-Math. Phys. Sci, vol.226, pp.216-226, 1954.

J. J. Fundenberger, M. J. Philippe, F. Wagner, and C. Esling, « Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys), Acta Mater, vol.45, issue.10, pp.4041-4055, 1997.

J. Huez, A. L. Helbert, X. Feaugas, I. Guillot, and M. Clavel, Damage process in commercially pure ?-titanium alloy without (Ti40) and with (Ti40-H) hydrides », vol.29, pp.1615-1628, 1998.

J. Kumar, S. Padma, B. Srivathsa, N. V. Rao, and E. V. Kumar, « Evolution of Damage in Near ? IMI-834 Titanium Alloy Under Monotonic Loading Condition: A Continuum Damage Mechanics Approach, J. Eng. Mater. Technol, vol.131, issue.3, pp.31012-031012, 2009.

P. Gilormini, C. Licht, and P. Suquet, Growth of voids in a ductile matrix: A review, vol.40, pp.43-80, 1988.

L. Zhonghua and G. Haicheng, « Bauschinger effect and residual phase stresses in two ductile-phase steels: Part II. The effect of microstructure and mechanical properties of the constituent phases on Bauschinger effect and residual phase stresses, Metall. Trans. A, vol.21, issue.2, pp.725-732, 1990.

P. Castany, Etude des micromecanismes de deformation d'un alliage Ti-6Al-4V par deformation met in situ influence d'un traitement de surface, 2007.

. Asm-international and . Éd, Properties and selection: stainless steels, tool materials and specialpurpose metals, 9, Metals Park, 1990.

H. Conrad, Effect of interstitial solutes on the strength and ductility of titanium, vol.26, pp.123-403, 1981.

N. Paton and W. Backofen, « Plastic deformation of titanium at elevated temperatures, Metall. Trans, vol.1, issue.10, p.2839, 1970.

H. Jousset, L. Rémy, and J. Strudel, « Viscoplasticité et microstructures d'un alliage de Titane : effets de la température et de la vitesse de sollicitation, 2009.

A. M. Garde, A. T. Santhanam, and R. E. , Reed-Hill, « The significance of dynamic strain aging in titanium, Acta Metall, vol.20, issue.2, pp.215-220, 1972.

O. N. Senkov and J. J. Jonas, « Effect of phase composition and hydrogen level on the deformation behavior of titanium-hydrogen alloys, Metall. Mater. Trans. A, vol.27, issue.7, pp.1869-1876, 1996.

M. Gerland, P. Lefranc, V. Doquet, and C. , Sarrazin-Baudoux, « Deformation and damage mechanisms in an ?/? 6242 Ti alloy in fatigue, dwell-fatigue and creep at room temperature. Influence of internal hydrogen », Mater. Sci. Eng. A, vol.507, issue.2, pp.132-143, 2009.
DOI : 10.1016/j.msea.2008.11.045

I. M. Robertson, The effect of hydrogen on dislocation dynamics, vol.64, pp.649-673, 1999.

H. Birnbaum, I. Robertson, P. Sofronis, and E. D. Teter, Mechanisms of hydrogen related fracture-a review », présenté à Second International Conference on Corrosion-Deformation Interactions. CDI'96, pp.172-195, 1996.

S. Arsene, J. B. Bai, and P. Bompard, Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) zircaloy cladding tubes: part I. hydride embrittlement in stress-relieved, annealed, and recrystallized zircaloys at 20 C and 300 C », Metall. Mater. Trans. A, vol.34, issue.3, pp.553-566, 2003.

C. L. Briant, Z. F. Wang, and E. N. Chollocoop, Hydrogen embrittlement of commercial purity titanium, vol.44, pp.1875-1888, 2002.
DOI : 10.1016/s0010-938x(01)00159-7

D. Hardie and S. Ouyang, « Effect of hydrogen and strain rate upon the ductility of mill-annealed Ti6Al4V », Corros. Sci, vol.41, issue.1, pp.155-177, 1999.

D. Banerjee and V. S. Arunachalam, « On the ?? interface phase in Ti alloys, Acta Metall, vol.29, issue.10, pp.1685-1694, 1981.
DOI : 10.1016/0001-6160(81)90003-1

G. F. Pittinato and W. D. Hanna, Hydrogen in ? transformed Ti-6Al-4V », vol.3, pp.2905-2909, 1972.

E. Jouanny, Étude de l'évolution microstructurale sous irradiation aux ions Ti2+ de deux alliages de titane : lien avec les propriétés mécaniques, 2017.

, Projet TESAMI ANR

G. Welsch, R. Boyer, and E. W. Collings, Materials Properties Handbook: Titanium Alloys, 1993.

E. Jouanny, Etude microstructurale de différents alliages base titane après irradiation aux neutrons et aux particules chargées. Lien avec les propriétés mécaniques, 2016.

L. Noirot-cosson, Oxydation et prise d'hydrogène dans des alliages de titane, 2015.

J. Tafel, Über die Polarisation bei kathodischer Wasserstoffentwicklung, vol.50, p.641, 1905.
DOI : 10.1515/zpch-1905-5043

J. Heyrovský, Recl. Trav. Chim. Pays-Bas, vol.46, issue.8, pp.582-585, 1927.

E. F. Rauch and M. Véron, Automated crystal orientation and phase mapping in TEM, Mater. Charact, vol.98, pp.1-9, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01121290

H. Hocquaux, Caractérisation des surfaces par SDL, 1997.

J. F. Watts and J. Wolstenholme, An Introduction to Surface Analysis by XPS and AES, 2005.

J. Barbillat, D. Bougeard, G. Buntinx, M. Delhaye, P. Dhamelincourt et al., Tech. Ing. CND Méthodes Surfaciques, 1999.

Y. Wouters, Oxydation thermique des métaux dans la vapeur d'eau. Cas du nickel et du titane, 1996.

H. Paucot, ICP-MS: couplage plasma induit par haute fréquence-spectrométrie de masse, 2010.

H. Idriss, K. S. Kim, and M. A. Barteau, « Surface-dependent pathways for formaldehyde oxidation and reduction on TiO2(001), vol.262, pp.113-127, 1992.

N. Do, Etude de l'oxydation thermique du titane et du zirconium sous irradiation aux ions d'argon dans le domaine du MeV (E? 15 MeV) », Ecole Polytechnique X, 2012.

J. T. Mayer, U. Diebold, T. E. Madey, and E. E. Garfunkel, Titanium and reduced titania overlayers on titanium dioxide(110), vol.73, pp.1-11, 1995.

L. P. Jeurgens, W. G. Sloof, F. D. Tichelaar, C. G. Borsboom, and E. J. Mittemeijer, « Determination of thickness and composition of aluminium-oxide overlayers on aluminium substrates, Appl. Surf. Sci, pp.11-15, 1999.

I. Olefjord, H. J. Mathieu, and E. P. Marcus, « Intercomparison of surface analysis of thin aluminium oxide films, Surf. Interface Anal, vol.15, issue.11, pp.681-692

K. Shimizu, C. Phanopoulos, R. Loenders, M. Abel, and J. F. Watts, The characterization of the interfacial interaction between polymeric methylene diphenyl diisocyanate and aluminum: a ToF-SIMS and XPS study, vol.42, pp.1432-1444

S. Hashimoto and A. Tanaka, « Alteration of Ti 2p XPS spectrum for titanium oxide by low-energy Ar ion bombardment, Surf. Interface Anal, vol.34, issue.1, pp.262-265

W. W. Gärtner, « Depletion-Layer Photoeffects in Semiconductors, Phys. Rev, vol.116, issue.1, pp.84-87, 1959.

M. A. Butler, « Photoelectrolysis and physical properties of the semiconducting electrode WO2, J. Appl. Phys, vol.48, issue.5, pp.1914-1920, 1977.

T. Armbruster, R. M. Danisi, and . Éd, Highlights in mineralogical crystallography, 2016.

A. P. Grosvenor, B. A. Kobe, M. C. Biesinger, and N. S. Mcintyre, « Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds, Surf. Interface Anal, vol.36, pp.1564-1574

M. C. Biesinger, L. W. Lau, A. R. Gerson, and R. S. Smart, « Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides, Appl. Surf. Sci, vol.257, issue.3, pp.887-898, 2010.

S. Gardey, « Etude de la corrosion generalisee des alliages 600, 690 et 800 en milieu primaire. Contribution a la comprehension des mecanismes, 1998.

F. Delabrouille, « Caractérisation par MET de fissures de corrosion sous contrainte d'alliages à base de nickel : influence de la teneur en chrome et de la chimie du milieu, 2004.

F. Carrette, Relâchement des produits de corrosion des tubes en alliage 690 de générateur de vapeur du circuit primaire des réacteurs à eau pressurisée, 2002.

L. Marchetti-sillans, Corrosion généralisée des alliages à base nickel en milieu aqueux à haute température. Apport à la compréhension des mécanismes, 2007.

J. Chivot, « Solubilité de la boehmite ?-AlOOH et de la bayérite ?-Al(OH)3 et spéciation de l'aluminium en solution aqueuse en fonction du pH et de la température, 1997.

B. Beverskog and I. Puigdomenech, « Revised Pourbaix diagrams for nickel at 25-300 °C », Corros. Sci, vol.39, issue.5, pp.969-980, 1997.

D. D. Macdonald, « The history of the Point Defect Model for the passive state: A brief review of film growth aspects, Electrochimica Acta, vol.56, issue.4, pp.1761-1772, 2011.

J. Schmidt and W. Vogelsberger, « Aqueous Long-Term Solubility of Titania Nanoparticles and Titanium(IV) Hydrolysis in a Sodium Chloride System Studied by Adsorptive Stripping Voltammetry, J. Solut. Chem, vol.38, issue.10, pp.1267-1282, 2009.

D. Mangin, F. Puel, and E. S. Veesler, « Polymorphism in Processes of Crystallization in Solution: A Practical Review, Org. Process Res. Dev, vol.13, issue.6, pp.1241-1253, 2009.

T. Fujii, Y. Takada, M. Nakanishi, J. Takada, M. Kimura et al., « Electronic structure of stoichiometric and non-stoichiometric epitaxial FeTiO 3+? films, J. Phys. Conf. Ser, vol.100, issue.1, p.12043, 2008.

L. M. Anovitz, The heat-capacity of ilmenite and phase equilibria in the system Fe-TO », 1985.

S. Halpegamage, P. Ding, X. Gong, and M. Batzill, Ordered Fe(II)Ti(IV)O 3 Mixed Monolayer Oxide on Rutile TiO 2 (011), vol.9, pp.8627-8636, 2015.

O. Kubaschewski, C. B. Alcock, and M. Thermochemistry, , 1979.

R. Shirley, M. Kraft, and O. R. Inderwildi, Electronic and optical properties of aluminium-doped anatase and rutile TiO 2 from ab initio calculations, Phys. Rev. B, vol.81, issue.7, 2010.

M. Steveson, T. Bredow, and A. R. Gerson, « MSINDO quantum chemical modelling study of the structure of aluminium-doped anatase and rutile titanium dioxide, Phys. Chem. Chem. Phys, vol.4, issue.2, pp.358-365, 2002.

W. Avansi, R. Arenal, V. R. De-mendonça, C. Ribeiro, and E. E. Longo, Vanadium-doped TiO2 anatase nanostructures: the role of V in solid solution formation and its effect on the optical properties, CrystEngComm, vol.16, issue.23, p.5021, 2014.

C. D. Wagner, L. E. Davis, M. V. Zeller, J. A. Taylor, R. H. Raymond et al., « Empirical atomic sensitivity factors for quantitative analysis by electron spectroscopy for chemical analysis, Surf. Interface Anal, vol.3, issue.5, pp.211-225

Y. Wouters, A. Galerie, and J. Petit, « Photoelectrochemical Study of Oxides Thermally Grown on Titanium in Oxygen or Water Vapor Atmospheres, J. Electrochem. Soc, vol.154, issue.10, p.587, 2007.

Y. Choi, « Thin Titanium Dioxide Film Electrodes Prepared by Thermal Oxidation, J. Electrochem. Soc, vol.139, issue.7, p.1803, 1992.

Y. Mizuno, « Temperature dependence of oxide decomposition on titanium surfaces in ultrahigh vacuum, J. Vac. Sci. Technol. Vac. Surf. Films, vol.20, issue.5, p.1716, 2002.

T. Smith, Oxidation of titanium between 25 degrees c and 400 degrees c », Surf. Sci, vol.38, issue.2, pp.292-312, 1973.
DOI : 10.1016/0039-6028(73)90163-5

G. Lu, S. L. Bernasek, and J. Schwartz, Surf. Sci, vol.458, issue.1, pp.80-90, 2000.

E. Hilner, Hydrogen absorption in Zircaloy during aqueous corrosion, 1964.

M. Tupin, M. Pijolat, F. Valdivieso, and M. Soustelle, Oxidation kinetics of ZrNbO in steam: Differences between the pre-and post-transition stages, vol.342, pp.108-118, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00409596

L. Fayette, J. Godlewski, and M. Tupin, « Vers un programme d'étude sur la compréhension des mécanismes d'hydruration des alliages de zirconium, Communication interne CEA, 2006.

H. Schmalzried and «. F. Kröger, The Chemistry of Imperfect Crystals, vol.68, pp.608-608

D. Caplan and M. Cohen, « The Volatilization of Chromium Oxide, J. Electrochem. Soc, vol.108, issue.5, p.438, 1961.
DOI : 10.1149/1.2428106

C. S. Tedmon, « The Effect of Oxide Volatilization on the Oxidation Kinetics of Cr and Fe-Cr Alloys, J. Electrochem. Soc, vol.113, issue.8, p.766, 1966.

E. W. Haycock, High-Temperature Sulfiding of Iron Alloys in Hydrogen Sulfide-Hydrogen Mixtures, J. Electrochem. Soc, vol.106, issue.9, p.764, 1959.

P. Bossis, D. Pecheur, K. Hanifi, J. Thomazet, and M. Blat, Comparison of the High Burn-Up Corrosion on M5 and Low Tin Zircaloy-4 », in Zirconium in the Nuclear Industry: Fourteenth International Symposium, P. Rudling et B. Kammenzind, Éd. 100 Barr Harbor Drive, pp.494-494, 2005.

E. Tal-gutelmacher and D. Eliezer, « High fugacity hydrogen effects at room temperature in titanium based alloys, J. Alloys Compd, pp.613-616, 2005.
DOI : 10.1016/j.jallcom.2004.12.172

H. Cha, J. Won, K. Jang, J. An, and K. Kim, « Tensile hoop stress-, hydrogen content-and cooling rate-dependent hydride reorientation behaviors of Zr alloy cladding tubes », J. Nucl. Mater, vol.464, pp.53-60, 2015.
DOI : 10.1016/j.jnucmat.2015.04.027

S. Min, M. Kim, and K. Kim, « Cooling rate-and hydrogen content-dependent hydride reorientation and mechanical property degradation of Zr-Nb alloy claddings, J. Nucl. Mater, vol.441, issue.1, pp.306-314, 2013.
DOI : 10.1016/j.jnucmat.2013.06.006

Y. Chang, « Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale, Acta Mater, vol.150, pp.273-280, 2018.

H. J. Liu, L. Zhou, P. Liu, and Q. W. Liu, « Microstructural evolution and hydride precipitation mechanism in hydrogenated Ti-6Al-4V alloy », Int. J. Hydrog. Energy, vol.34, issue.23, pp.9596-9602, 2009.
DOI : 10.1016/j.ijhydene.2009.09.098

H. G. Nelson, « A film-rupture model of hydrogen-induced, slow crack growth in acicular alphabeta titanium, Metall. Trans. A, vol.7, issue.5, pp.621-627, 1976.

G. Lütjering and J. C. William, Fundamental Aspects, pp.15-52, 2007.

M. Grange, J. Besson, and E. E. Andrieu, Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets, Metall. Mater. Trans. A, vol.31, issue.3, pp.679-690, 2000.
DOI : 10.1007/s11661-000-0010-9

J. J. Xu, H. Y. Cheung, and S. Q. Shi, « Mechanical properties of titanium hydride, J. ALLOYS Compd, vol.436, issue.2, pp.82-85, 2007.

S. Arsene, J. Bai, and P. Bompard, Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) ZIRCALOY cladding tubes: Part III. Mechanical behavior of hydride in stress-relieved annealed and recrystallized ZIRCALOYs at 20 °C and 300 °C, Metall. Mater. Trans. A, vol.34, issue.3, pp.579-588, 2003.

M. L. Saux, J. Besson, S. Carassou, C. Poussard, and E. X. Averty, « Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between 25°C and 480°C under various stress states, Eng. Fail. Anal, vol.17, issue.3, pp.683-700, 2010.

J. Gu and D. Hardie, « Effect of hydrogen on the tensile ductility of Ti6Al4V: Part II Fracture of pre-cracked tensile specimens, J. Mater. Sci, vol.32, issue.3, pp.609-617, 1997.

S. K. Yagnik, R. C. Kuo, Y. R. Rashid, A. J. Machiels, and R. L. Yang, Effect of Hydrides on the Mechanical Properties of Zircaloy-4 », Proc. 2004 Int. Meet. LWR Fuel Perform. Orlando Fla, 2004.

R. Choubey and M. P. Puls, « Crack initiation at long radial hydrides in Zr-2.5 Nb pressure tube material at elevated temperatures, Metall. Mater. Trans. A, vol.25, issue.5, pp.993-1004, 1994.

G. Y. Gao and S. C. Dexter, Effect of hydrogen on creep behavior of Ti-6AI-4V alloy at room temperature, vol.18, pp.1125-1130, 1987.

D. S. Shih, I. M. Robertson, and H. K. Birnbaum, Hydrogen embrittlement of ? titanium: In situ tem studies, vol.36, pp.111-124, 1988.